JTJuris Tdesk Pro
Guides › Contracts

Contract Management Software for Legal Teams: Nine Mistakes That Stall Adoption

Most CLM rollouts don't fail at go-live. They fail in the six months after it, as bad data, slow approvals and sales workarounds pile up. Here are nine mistakes, and the fix for each one, to make before your first renewal.

Juris Tdesk Pro editorial team · November 2026 · 8 min read

Why CLM adoption stalls after go-live

Your team bought contract management software for legal teams. The implementation partner has left and usage is flat. Sales still emails Word drafts, and half the repository can't be searched. The renewal notice lands in nine months, and you have to decide whether to renew, renegotiate or replace.

Most of these problems don't start with the software. They start with decisions made in the first few months after purchase: what got migrated, how approvals were designed, and who owns the clause library. Those decisions set quickly. Within a couple of quarters users have built workarounds, and the bad data is very hard to get out.

Advertisement

The nine mistakes below come up across vendors, whether the platform is Ironclad, Icertis, Agiloft, Juro, Sirion, LinkSquares or Docusign CLM. Each one has a fix you can make before renewal, and several also give you leverage in that negotiation.

Mistake one: migrating the legacy repository as-is

The team loads every contract from shared drives, email and the old document management system because "we'll clean it up later." Nobody does. Duplicate drafts end up next to executed versions, unsigned PDFs are labeled final, and expired agreements keep setting off renewal alerts. Lawyers get poor search results and go back to asking a colleague.

The fix: migrate in tiers.

  • Tier 1: active, executed agreements above a set value or risk threshold. Migrate them with human-verified metadata.
  • Tier 2: active, low-value agreements. Use automated extraction and spot-check a sample, for example one in ten.
  • Tier 3: expired or superseded agreements. Archive them read-only, or leave them where they are, depending on your retention policy.

Retention and data-location rules differ by jurisdiction. The EU's GDPR, India's DPDP Act, Brazil's LGPD and the data-protection laws in several Gulf states can all affect where archived contracts containing personal data may be stored and for how long. Talk to privacy counsel before you consolidate repositories across regions. Outsourced extraction and cleanup commonly costs a few dollars to the mid-teens per contract. For a mid-sized backlog that usually adds up to a five-figure project. These are indicative 2026 market ranges that vary with volume, language mix and document quality, so get quotes from both your vendor and an independent provider.

Mistake two: a metadata schema nobody will maintain

The schema came out of a workshop where each stakeholder added the field they wanted, and it ended up with 40 fields. Six months later a handful are filled in reliably and the rest are blank or wrong. Dashboards built on empty fields mislead people, and leadership stops trusting them.

The fix: only require fields that drive a specific action. Those are counterparty, contract type, effective date, expiry date, renewal mechanism, notice period, governing law, value band and business owner. Everything else is optional. Our rule: a field becomes required only when someone can name the report or alert that depends on it.

Hypothetical example: a 25-lawyer in-house team cuts its required fields from 34 to 11. Completion improves because every remaining field has an obvious purpose, and renewal alerts start firing on accurate dates.

Mistakes three and four: approval chains that copy the org chart

Mistake three is sending every contract through legal, finance, procurement and a business VP, whatever its size. Mistake four is building workflows with no delegation or timeout rules, so one approver on leave holds up dozens of deals. Both push users back to email. It feels faster even when it isn't.

Each contract should go through only the approvals its risk requires. Start with a routing matrix like this:

Contract profileRequired approvalsTarget turnaround
Standard NDA, unedited templateNone (self-serve)Same day
Sales agreement within playbook positionsDeal desk or contract manager1–2 business days
Deviation from fallback positionsLegal counsel2–4 business days
Uncapped liability, cross-border data transfer or high valueLegal plus finance or GC3–7 business days

Turn on automatic delegation after a set period of inactivity (48 hours works for most teams), and run approvals in parallel wherever reviewers don't depend on each other. If more than a third of your volume lands in the top tier, your thresholds are almost certainly too low.

Mistake five: letting sales bypass intake

When intake is optional for the commercial team, reps who find the form slow will send counterparty paper straight to a lawyer they know. Those contracts never reach the system, so the repository is missing the high-value deals it was bought to track.

The fix: put intake inside the tools sales already works in. Most major CLM platforms connect to Salesforce, HubSpot or Microsoft Dynamics, so a rep can open a request from the opportunity record with the deal data already filled in. Keep the form to eight questions or fewer. Then enforce it. After a published cut-off date, legal stops accepting review requests by email, and the head of sales agrees to that rule before it's announced. Without that sign-off, the cut-off won't hold.

Budget for the connector. Some vendors include CRM integration in higher tiers. Others charge an annual add-on fee, often in the low-to-mid five figures in USD, or bill it as a separate setup project. These are typical 2026 ranges and vary by contract. Confirm what your current agreement covers before you build a business case around it.

Mistakes six and seven: clause libraries with no owner and no fallbacks

Mistake six is loading approved clauses at go-live and then assigning nobody to maintain them. Laws change and so does the business's risk appetite. Within a year the library is serving an outdated data processing clause and liability wording that's older than the last insurance renewal. Lawyers notice and go back to their own precedent folders.

Mistake seven is storing only the preferred wording. A library without fallback positions can't support self-serve negotiation, so every redline goes back to legal.

The fix: give each clause family a named lawyer as owner, covering areas such as data protection, liability, IP and termination. The owner reviews those clauses every quarter and after any relevant legal change in the jurisdictions you contract in. Store each clause with a preferred position, one or two approved fallbacks, and a walk-away point that sends the contract to counsel. Show the last review date on every clause so users can see it's current.

Mistakes eight and nine: counting logins and leaving configuration to the vendor

Mistake eight is reporting adoption as active users or logins. Those numbers don't tell you whether contracts move faster or whether risk is better controlled. Track these instead:

  • Cycle time by contract tier
  • Share of contracts started through intake
  • Share signed on templates without legal review
  • Missed renewal or notice deadlines

Mistake nine is having no internal system owner. When every workflow change goes through the vendor's customer success team or a paid partner, small fixes take weeks and users conclude the system can't change. Appoint an internal CLM administrator. For a team handling a few thousand contracts a year, a legal operations analyst spending roughly a third to half of their time on the platform is usually enough. Check that your contract gives that person admin rights to edit workflows, fields and templates without professional services fees. If it doesn't, ask for that at renewal.

A 90-day plan to fix adoption before renewal

With six to twelve months left before renewal, you have time to fix adoption and build evidence for the negotiation. Work in this order:

  1. Days 1–30: audit the repository by tier, cut required metadata to the fields that drive actions, and assign clause owners.
  2. Days 31–60: rebuild approval routing on a risk matrix, add delegation timeouts, and launch CRM-based intake with a firm email cut-off.
  3. Days 61–90: report cycle time, intake share and self-serve rate against your starting baseline. Record which problems came from the product and which came from your own configuration.

Then use this rule. If the problems were in your configuration and the metrics are now improving, renew and ask for included admin training or integration credits. If problems remain after you've fixed configuration, such as weak extraction accuracy, rigid workflow limits or slow support, ask for price concessions or run a competitive evaluation. Mid-market CLM subscriptions typically fall somewhere between the low five figures and the low six figures in USD per year. That's an indicative 2026 range, and pricing varies with region, contract volume and seat model, so confirm current terms with each vendor. Where the decision affects retention obligations or cross-border data transfer, get advice from qualified counsel in each jurisdiction involved.

Quick answers

How long should CLM adoption take before we judge whether it's working?

Give it three to six months after go-live. Judge it on outcomes such as cycle time and intake share, not logins. If those numbers still haven't moved after you've fixed configuration problems, the platform itself may be the constraint. Start that review at least six months before your renewal date.

Should we migrate all our legacy contracts into the new CLM?

Usually not. Migrate active, executed agreements with verified metadata first. Move low-value active contracts with automated extraction and spot checks. Archive expired agreements under your retention policy. Retention and data-location rules differ by country, so check with privacy counsel before consolidating across regions.

How many approval steps should a standard contract have?

Unedited templates such as NDAs shouldn't need any approval. Agreements within playbook positions usually need one reviewer. Add legal, finance or GC approval only for deviations and high-risk terms. Run approvals in parallel and set delegation timeouts so one absent approver can't hold everything up.

Who should own the clause library after implementation?

Give each clause family, such as data protection, liability and IP, a named lawyer who reviews it quarterly and after relevant legal changes. A legal operations administrator can handle publishing and version control, but the substance of each clause should stay with the lawyer who owns it.

What should we negotiate for at CLM renewal if adoption has been slow?

Gather evidence first. If the problems came from your own configuration, ask for included admin training, integration credits, or admin rights that let you change workflows without paying for professional services. If product limitations remain after you've fixed configuration, ask for price concessions or run a competitive evaluation. Confirm current pricing and terms directly with each vendor.

Written by the Juris Tdesk Pro editorial team. Prices, features and rules change often - confirm details with the vendor or a licensed professional before you decide.